Roughly 4'x4' 1.5" Foam Insulation
Viewed: 879 times.
|
Poplar wood strips
Viewed: 801 times.
|
Hacking it down to a 47" square
Viewed: 861 times.
|
Cut the 47" square into 4x 23.5" squares
Viewed: 809 times.
|
Poplar Strips cut into 2' lengths
Viewed: 793 times.
|
Silicone Glue for adhering wood to foam
Viewed: 806 times.
|
Wood glued to board (1)
Viewed: 746 times.
|
Wood glued to board (2)
Viewed: 779 times.
|
wood glued to board (3)
Viewed: 668 times.
|
Hack off the overlap corners with a jewlers saw.
Viewed: 1276 times.
|
Clean corner.
Viewed: 717 times.
|
tap in 2 or 3 small nails. This will keep the corners square permanantly.
Viewed: 640 times.
|
4 clean corners.
Viewed: 639 times.
|
All squared up :) (you may need to play to find the best fit. Make note of the orientation of the sections.)
Viewed: 740 times.
|
shot 2
Viewed: 615 times.
|
close up of center. Make sure those line up well, it'll stand out the most.
Viewed: 720 times.
|
shot of back. For now.
Viewed: 737 times.
|
1/8" Hardboard mounted to the back. Held on by Silicone Glue.
Viewed: 626 times.
|
close up of board edge. Nails used to hold everything still while the glue dries. The hardboard can be a bit short, but as long as it doesn't overlap you're good.
Viewed: 691 times.
|
P1010055
Viewed: 753 times.
|
P1010056
Viewed: 633 times.
|
P1010057
Viewed: 596 times.
|
P1010058
Viewed: 607 times.
|
P1010059
Viewed: 598 times.
|
P1010060
Viewed: 699 times.
|
P1010061
Viewed: 683 times.
|
P1010062
Viewed: 639 times.
|
P1010063
Viewed: 581 times.
|
P1010064
Viewed: 658 times.
|
P1010065
Viewed: 662 times.
|
P1010066
Viewed: 593 times.
|
P1010067
Viewed: 561 times.
|
P1010068
Viewed: 574 times.
|
P1010069
Viewed: 604 times.
|
P1010070
Viewed: 632 times.
|
P1010071
Viewed: 784 times.
|
P1010072
Viewed: 789 times.
|
P1010043
Viewed: 620 times.
|
P1010044
Viewed: 608 times.
|
P1010045
Viewed: 633 times.
|
